Large Fragment Locking Plates: Proximal Femur, Distal Femur And Tibial Plateau

Why screw diameter is the defining variable
 
In the small fragment tier, the limiting factor is fragment size. In the large fragment tier, it is soft tissue. A 5.0mm screw in a proximal femur is mechanically unremarkable; what matters is whether the plate profile can pass through the muscle envelope without excessive periosteal stripping.
 
AOYE's large fragment range makes the diameter tiers explicit:
 
HA3.5 / HC3.5 - proximal tibia and distal tibia plates. A conservative diameter that suits tibial shaft and plateau fragments where the cross-section is adequate but the bone quality is variable.
HA4.5 / HC5.0 - proximal femur and distal femur plates. Larger diameter for larger fragments and for the higher loads generated at the femoral neck and condylar region.
HC5.0 alone - the proximal femoral serpentine plate. A single screw option simplifies instrumentation for a plate whose geometry already constrains the insertion path.
 
 
Proximal femur: the serpentine plate
 
 
The proximal femoral serpentine locking plate (AY-L001 to AY-L005) uses a 4-to-8 hole progression in 18mm increments, running from 144mm to 216mm.
 
Code Specification Length Screw
AY-L001 4 Holes L 4 Holes R 144mm
AY-L002 5 Holes L 5 Holes R 162mm
AY-L003 6 Holes L 6 Holes R 180mm
AY-L004 7 Holes L 7 Holes R 198mm
AY-L005 8 Holes L 8 Holes R 216mm
 
The stepped length series matters commercially as well as clinically. A distributor carrying only the 144mm and 216mm ends will either over-order on shelf or be unable to supply the 180mm length that a mid-range fracture needs. The progression is uniform enough to plan a stocking ladder.
 
 
Distal femur: three distinct geometries
 
The distal femur is where the anatomy resists a single plate solution, and AOYE's range reflects that with three separate families.
 
Distal Femoral Lateral Locking Plate (AY-L033 to AY-L036)
 
Code Specification Length Screw
AY-L038 5 Holes L 5 Holes R 142mm
AY-L039 6 Holes L 6 Holes R 160mm
AY-L040 7 Holes L 7 Holes R 178mm
AY-L041 8 Holes L 8 Holes R 196mm
AY-L042 9 Holes L 9 Holes R 214mm
 
Medical Distal Femoral Anatomical Locking Plate (AY-L038 to AY-L042)
 
Code Specification Length Screw
AY-L038 5 Holes L 5 Holes R 142mm
AY-L039 6 Holes L 6 Holes R 160mm
AY-L040 7 Holes L 7 Holes R 178mm
AY-L041 8 Holes L 8 Holes R 196mm
AY-L042 9 Holes L 9 Holes R 214mm
 
Distal Lateral Femoral Osteotomy Locking Plate (AY-L047)
 
Code Specification Length Screw
AY-L047 5 Holes L 5 Holes R 145mm
 
The anatomical plate follows a 5-to-9 hole progression from 142mm to 214mm in 18mm increments, matched to the condylar width of the femur. The lateral plate runs 5 and 7 hole options at 156mm and 196mm. The osteotomy plate is a single 5-hole 145mm configuration - a specialised corrective construct rather than a general fracture plate.
 
 
Proximal tibia: four geometries, three screw tiers
 
Proximal tibial fractures vary enormously in fragment count, and AOYE offers four distinct plate geometries to cover them.
 
Proximal Tibial Lateral Locking Plate (AY-L089 to AY-L094)
 
Code Specification Length Screw
AY-L001 4 Holes L 4 Holes R 144mm
AY-L002 5 Holes L 5 Holes R 162mm
AY-L003 6 Holes L 6 Holes R 180mm
AY-L004 7 Holes L 7 Holes R 198mm
AY-L005 8 Holes L 8 Holes R 216mm
 
Proximal Tibial T-Shaped Locking Plate (AY-L098 to AY-L103)
 
Code Specification Length Screw
AY-L038 5 Holes L 5 Holes R 142mm
AY-L039 6 Holes L 6 Holes R 160mm
AY-L040 7 Holes L 7 Holes R 178mm
AY-L041 8 Holes L 8 Holes R 196mm
AY-L042 9 Holes L 9 Holes R 214mm
 
LCP Proximal-Lateral L-Shaped Tibial Plate (AY-L105 to AY-L109)
 
Code Specification Length Screw
AY-L105 5 Holes L 5 Holes R 92mm
AY-L106 6 Holes L 6 Holes R 104mm
AY-L107 7 Holes L 7 Holes R 116mm
AY-L108 8 Holes L 8 Holes R 128mm
AY-L109 9 Holes L 9 Holes R 140mm
 
Proximal Tibial Medial Spoon Locking Plate (AY-L117 to AY-L121)
 
Code Specification Length Screw
AY-L117 2 Holes 82mm HA3.5 HC3.5
AY-L118 3 Holes 95mm
AY-L119 4 Holes 108mm
AY-L120 5 Holes 121mm
AY-L121 6 Holes 134mm
 
Note the code reuse again: AY-L117 to AY-L121 appears on the proximal tibial spoon plate and AY-L117 to AY-L120 on the volar oblique distal radius plate. A flat SKU list keyed on code alone will produce collisions between two completely different anatomical regions. Key on family plus code, or on the anatomical grouping in your own catalogue.
 
 
Distal tibia: wing-shaped, anteromedial, medial and lateral
 
Distal tibial fractures are the hardest of the periarticular problems because the medial cortex is subcutaneous and the bone cross-section narrows distally.
 
Distal Tibial Wing-Shaped Locking Plate (AY-L066 to AY-L069)
 
Code Specification Length Screw
AY-L066 5 Holes 121mm HA3.5 HC3.5
AY-L067 7 Holes 147mm
AY-L068 9 Holes 173mm
AY-L069 11 Holes 199mm
 
Medial Distal Tibial Locking Plate (AY-L057 to AY-L060)
 
Code Specification Length Screw
AY-L038 5 Holes L 5 Holes R 142mm
AY-L039 6 Holes L 6 Holes R 160mm
AY-L040 7 Holes L 7 Holes R 178mm
AY-L041 8 Holes L 8 Holes R 196mm
AY-L042 9 Holes L 9 Holes R 214mm
 
The wing-shaped plate progresses 5, 7, 9 and 11 holes from 121mm to 199mm - a 26mm increment series that gives unusually fine length control for a distal tibial construct. All four sizes use the HA3.5 / HC3.5 tier.
 
 
What a distributor should stock first
 
For a new large fragment franchise, sequence matters.
 
Anatomical distal femur (AY-L038 to AY-L042) and proximal tibial lateral (AY-L089 to AY-L094) first. Both are high-volume, both use the 4.5/5.0mm screw tier, and both have a clean hole progression.
Distal tibial wing-shaped (AY-L066 to AY-L069) next - the 26mm increment series means a partial stocking ladder still covers most cases.
Proximal femur serpentine third. It is a single screw option, which makes the instrument set simple, but it is a narrower clinical indication.
Hold off on the osteotomy plate until you have demand. AY-L047 is a single code with a highly specialised indication.
 
 
Frequently asked questions
 
What is the largest locking plate in the AOYE large fragment range?
The proximal femoral serpentine locking plate AY-L005 is an 8-hole left/right plate at 216mm, the longest single plate in the large fragment range.
 
Which screws does the distal femoral anatomical locking plate use?
The Medical Distal Femoral Anatomical Locking Plate (AY-L038 to AY-L042) is specified with HA4.5 and HC5.0 screws, in a 5-to-9 hole progression from 142mm to 214mm.
 
Can the same screw tray cover both proximal and distal femur plates?
Yes for the 4.5/5.0mm tier - the proximal femur serpentine plate uses HC5.0 and the distal femur plates use the HA4.5/HC5.0 combination, so a 4.5/5.0mm driver covers both. The 3.5mm tier used on tibial plates needs a separate driver.
 
How many screw holes does the distal tibial wing-shaped plate come in?
Four: 5, 7, 9 and 11 holes, at 121mm, 147mm, 173mm and 199mm respectively, all using HA3.5 and HC3.5 screws.
 
Does AOYE supply large fragment plates with matching instruments?
Yes. The AOYE catalogue includes specific instrument sets for the locking plate systems, and OEM configurations can be built to match a distributor instrument list.
 
 
Quality and compliance
 
All large fragment plates are manufactured in medical-grade titanium alloy under an ISO 13485:2016 quality management system with CE certification, produced in cleanroom-controlled facilities covering more than 3,660 square metres.
 
Per order, gamma or ethylene oxide sterilization and accompanying documentation including Declaration of Conformity, instructions for use and material traceability records are available. Distributor enquiries receive a response within 24 hours.
 
 
Key Takeaways
 
Metric Value
Large fragment plate families 17
Catalogue code range AY-L001 to AY-L149
Standard screw tier HA3.5 / HC3.5 up to HA4.5 / HC5.0
Largest plate length in range 216mm (8-hole proximal femur)
Smallest plate length in range 80mm (5-hole lateral distal tibia)
Anatomical regions covered Proximal femur, distal femur, proximal tibia, distal tibia
 
Browse the complete Large Fragment Plate range
 
All locking plate systems
 
Trauma fixation systems
 
Request a quotation

2026/11/19 11:16:08 2 次